Citation Longitude Jet Exterior
Citation Longitude Jet Interior

Specifications

8-9 Passengers

112 Baggage Capacity

547 Airspeed

4,028 Range

6.42 Cabin Width

6 Cabin Height

28.83 Cabin Length

Enclosed Lavatory Style

The Cessna Citation Longitude is a super-midsize jet that seats eight or nine passengers depending on the configuration. It is longer than its sister aircraft, the Citation Latitude, by three feet five inches in cabin length and almost eleven feet in overall length. With enough range to go coast-to-coast nonstop it is comparable to the Challenger 350, Gulfstream G280, and Embraer Praetor.

Longitude Jet Charter

The low noise, a full two decibels lower in the aft cabin than the quietest of its competitors, according to Textron Aviation, combined with the low cabin altitude and high pressurization differential of 9.66 psi for an improved cabin experience. At the maximum operating altitude of 45,000 feet, cabin altitude is 5,950 feet. At FL410, cabin altitude drops below 5,000 feet.

The Longitude has one air-cycle machine that works with an inline heat exchanger to condition cabin air. Either system can handle the cabin’s air needs by itself, and if the air-cycle machine fails, the heat exchanger acts as a capable backup, although maximum altitude is then limited to FL400.

Citation Cabin Specifications

Two double-club seating areas are standard, but buyers can opt to replace the two pedestal seats on the left rear with a three-place couch. A single side-facing seat can be fitted opposite the main entry door, but this cuts into the galley space. The Longitude’s seats are new, one of the benefits of Textron Aviation’s purchase of Wichita-based furniture manufacturing assets from UTC Aerospace Systems in 2015. Textron Aviation now makes its own interior furnishings, which improves quality control and allows it to respond better to customer feedback.

Call JetOptions today for a custom trip and price quote for your next Longitude private jet flight.

Citation Longitude Private Jet Charter Price Quote:

Fields marked * are required.